UPVC Fittings Archives - Pipewale

uPVC Pipes Tank Nipple (SCH 80)

Raj Trivedi — Tue, 09 Apr 2019 16:28:20 +0000

In plumbing and piping, a nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.The length of the nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for a wrench to grasp (sometimes referred to as a "hex nipple"), or it may simply be made from a short piece of pipe (sometimes referred to as a "barrel nipple" or "pipe nipple"). A "close nipple" has no unthreaded area; when screwed tightly between two female fittings, very little of the nipple remains exposed. A close nipple can only be unscrewed by gripping one threaded end with a pipe wrench which will damage the threads and necessitate replacing the nipple, or by using a specialty tool known as a nipple wrench (or known as an internal pipe wrench) which grips the inside of the pipe, leaving the threads undamaged. When the ends are of two different sizes it is called a reducer or unequal nipple.

[contact-form-7 id="12521" title="New Enquiry Form Raj"]

The post uPVC Pipes Tank Nipple (SCH 80) appeared first on Pipewale.

uPVC Pipes Tank Nipple with one side pipe fitment

Raj Trivedi — Tue, 09 Apr 2019 16:28:20 +0000

Pipewale is known as the best dealers because we provide clients with the premium quality of UPVC Pipes Tank Nipple. It is useful for the irrigation system and chemical transportation. They have rich attributes such as corrosion resistance finish, accurate dimension, and thermal stability which makes UPVC tank nipple highly demanded

Product Details:

Material UPVC

Size 1/2 inch, 3/4 inch, 1 inch, 2 inch

Application Structure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe

Also, check out PVC Fitings

The post uPVC Pipes Tank Nipple with one side pipe fitment appeared first on Pipewale.

uPVC Pipes Elbow 90 (SCH 80)

Raj Trivedi — Tue, 09 Apr 2019 16:28:15 +0000

A 90º elbow, also known as a "90 bend", "90 ell" or "quarter bend", attaches readily to plastic, copper, cast iron, steel, and lead, and is attached to rubber with stainless-steel clamps. Other available materials include silicone, rubber compounds, galvanized steel, and nylon. It is primarily used to connect hoses to valves, water pumps and deck drains. A 45º elbow, also known as a "45 bend" or "45 ell", is commonly used in water-supply facilities, food, chemical and electronic industrial pipeline networks, air-conditioning pipelines, agriculture and garden production, and solar-energy facility piping.

[contact-form-7 id="12521" title="New Enquiry Form Raj"]

The post uPVC Pipes Elbow 90 (SCH 80) appeared first on Pipewale.

uPVC Pipes Union (SCH 80)

Raj Trivedi — Tue, 09 Apr 2019 16:28:15 +0000

union also connects two pipes, but is quite different than a coupling, as it allows future disconnection of the pipes for maintenance. In contrast to a coupling requiring solvent welding, soldering, or rotation (for threaded couplings), a union allows easy connection and disconnection, multiple times if needed. It consists of three parts: a nut, a female end and a male end. When the female and male ends are joined, the nut seals the joint by pressing the two ends tightly together. Unions are a type of very compact flange connector.

[contact-form-7 id="12521" title="New Enquiry Form Raj"]

The post uPVC Pipes Union (SCH 80) appeared first on Pipewale.

uPVC Pipes Tee (SCH 80)

Raj Trivedi — Tue, 09 Apr 2019 16:28:15 +0000

A tee, the most common pipe fitting, is used to combine or divide fluid flow. It is available with female thread sockets, solvent-weld sockets or opposed solvent-weld sockets and a female-threaded side outlet. Tees can connect pipes of different diameters or change the direction of a pipe run, or both. Available in a variety of materials, sizes and finishes, they may also be used to transport two-fluid mixtures. Tees may be equal or unequal in size of their three connections, with equal tees the most common.

[contact-form-7 id="12521" title="New Enquiry Form Raj"]

The post uPVC Pipes Tee (SCH 80) appeared first on Pipewale.